MENU

Courses A La Carte – Heating Systems

132-5 The Annual Tune Up $64 | REGISTER

Oil Heating System Annual Tune-Up; step by step procedures, customer relation issues and Code requirements are covered in this module. (3 NATE recognized CEHs, 1.5 BPI CEUs)

132-6 Combustion Efficiency Testing $64 | REGISTER

Testing procedures and analysis to obtain optimum operational efficiency from the Fuel Oil Combustion System is discussed in this module. (3 NATE recognized CEHs, 1.5 BPI CEUs)

133-1 Fuel Gas Composition $64 | REGISTER

Topics discussed in this module are Fuel Gases, their structure and usage. (3 NATE recognized CEHs, 1.5 BPI CEUs)

133-2 Pressure Regulators, Burners and Heat Exchangers $64 | REGISTER

Fuel Gas pressure control and the equipment necessary to accomplish combustion and heat exchange is discussed in this module. (3 NATE recognized CEHs, 1.5 BPI CEUs)

133-3 Standing Pilot Systems $64 | REGISTER

Standing Pilot Ignition Systems are discussed in this module, also the components of this type of system and their use in more modern systems. (3 NATE recognized CEHs, 1.5 BPI CEUs)

133-4 Electronic Ignition $64 | REGISTER

Modern gas burner Electronic Ignition Systems, their methods and components are analyzed in this module. (3 NATE recognized CEHs, 1.5 BPI CEUs)

133-5 High Efficiency Furnaces $64 | REGISTER

This module will present new high efficiency gas burning concepts and how they are incorporated into furnace design. We will also look at the electrical controls that keep them working safely and efficiently. (3 NATE recognized CEHs, 1.5 BPI CEUs)

133-6 Troubleshooting Gas Burner Systems $64 | REGISTER

This module will present an orderly sequence to troubleshoot problems in Gas Burner Systems. (3 NATE recognized CEHs, 1.5 BPI CEUs)

135-1 What is a Heat Pump? $64 | REGISTER

This module introduces you to heat pumps and the common types of heat pump systems used for comfort heating and cooling. (3 NATE recognized CEHs, 1.5 BPI CEUs)

135-2 Heat Pump Installation and Quality Criteria $64 | REGISTER

This module introduces you to heat pump installation criteria that typically should be considered and followed. It focuses on quality as outlined by the ACCA HVAC Quality Installation Specifications (QI). (3 NATE recognized CEHs, 1.5 BPI CEUs)

135-4 The Heat Pump Heating Mode $64 | REGISTER

This module introduces you to the heating mode, or cycle, of a heat pump. We will focus on Air-Source Heat Pumps (ASHPs) during this module. (3 NATE recognized CEHs, 1.5 BPI CEUs)

135-7 Heat Pump Troubleshooting $64 | REGISTER

The intent of this module is to describe and illustrate basic troubleshooting steps for an Air-Source Heat Pump (ASHP). (3 NATE recognized CEHs, 1.5 BPI CEUs)